# More than one file can be listed, separated by spaces; all will be
# loaded. The included files can have preseed/include directives of their
# own as well. Note that if the filenames are relative, they are taken from
# the same directory as the preconfiguration file that includes them.
d-i preseed/include string stretch.conf

# This is how to make the installer shutdown when finished, but not
# reboot into the installed system.
#d-i debian-installer/exit/reboot boolean true
# This will power off the machine instead of just halting it.
#d-i debian-installer/exit/poweroff boolean true


### Partitioning
## Partitioning example
# If the system has free space you can choose to only partition that space.
# This is only honoured if partman-auto/method (below) is not set.
#d-i partman-auto/init_automatically_partition select biggest_free

# Alternatively, you may specify a disk to partition. If the system has only
# one disk the installer will default to using that, but otherwise the device
# name must be given in traditional, non-devfs format (so e.g. /dev/sda
# and not e.g. /dev/discs/disc0/disc).
# For example, to use the first SCSI/SATA hard disk:
#d-i partman-auto/disk string /dev/sda /dev/sdb
# In addition, you'll need to specify the method to use.
# The presently available methods are:
# - regular: use the usual partition types for your architecture
# - lvm:     use LVM to partition the disk
# - crypto:  use LVM within an encrypted partition
# - raid:    use RAID
#d-i partman-auto/method string raid

# If one of the disks that are going to be automatically partitioned
# contains an old LVM configuration, the user will normally receive a
# warning. This can be preseeded away...
##d-i partman-lvm/device_remove_lvm boolean true
# The same applies to pre-existing software RAID array:
##d-i partman-md/device_remove_md boolean true
# And the same goes for the confirmation to write the lvm partitions.
##d-i partman-lvm/confirm boolean true
##d-i partman-lvm/confirm_nooverwrite boolean true

# You can choose one of the three predefined partitioning recipes:
# - atomic: all files in one partition
# - home:   separate /home partition
# - multi:  separate /home, /var, and /tmp partitions
#d-i partman-auto/choose_recipe select multi

# Or provide a recipe of your own...
# If you have a way to get a recipe file into the d-i environment, you can
# just point at it.
#d-i partman-auto/expert_recipe_file string /hd-media/recipe

# If not, you can put an entire recipe into the preconfiguration file in one
# (logical) line. This example creates a small /boot partition, suitable
# swap, and uses the rest of the space for the root partition:
#d-i partman-auto/expert_recipe string \
#      multiraid ::                                      \
#                512 30 512 raid                         \
#                        $lvmignore{ }                   \
#                        $primary{ }                     \
#                        method{ raid }                  \
#                .                                       \
#		5000 35 100000000 raid		        \
#			$lvmignore{ }			\
#                        $primary{ }                     \
#			method{ raid }			\
#		.					\
#		4000 50 10000 xfs			\
#			$defaultignore{ }		\
#			$lvmok{ }			\
#                        lv_name{ root }                 \
#			method{ format }		\
#			format{ }			\
#			use_filesystem{ }		\
#			filesystem{ xfs }		\
#			mountpoint{ / }			\
#		.					\
#		64 60 200% linux-swap			\
#			$defaultignore{ }		\
#			$lvmok{ }			\
#                        lv_name{ swap }                 \
#			method{ swap }			\
#			format{ }			\
#		.					

# The full recipe format is documented in the file partman-auto-recipe.txt
# included in the 'debian-installer' package or available from D-I source
# repository. This also documents how to specify settings such as file
# system labels, volume group names and which physical devices to include
# in a volume group.

## Partitioning using RAID
# The method should be set to "raid".
#d-i partman-auto/method string raid
# Specify the disks to be partitioned. They will all get the same layout,
# so this will only work if the disks are the same size.
#d-i partman-auto/disk string /dev/sda /dev/sdb

# Last you need to specify how the previously defined partitions will be
# used in the RAID setup. Remember to use the correct partition numbers
# for logical partitions. RAID levels 0, 1, 5, 6 and 10 are supported;
# devices are separated using "#".
# Parameters are:
# <raidtype> <devcount> <sparecount> <fstype> <mountpoint> \
#          <devices> <sparedevices>
#d-i partman-auto-raid/recipe string             \
#        1 2 0 lvm /boot                         \
#                /dev/sda1#/dev/sdb1             \
#        .                                       \
#        1 2 0 lvm -                             \
#                /dev/sda2#/dev/sdb2             \
#        .                               

# For additional information see the file partman-auto-raid-recipe.txt
# included in the 'debian-installer' package or available from D-I source
# repository.

# This makes partman automatically partition without confirmation.
#d-i partman-md/confirm boolean true
#d-i partman-partitioning/confirm_write_new_label boolean true
#d-i partman/choose_partition select finish
#d-i partman/confirm boolean true
#d-i partman/confirm_nooverwrite boolean true

## Controlling how partitions are mounted
# The default is to mount by UUID, but you can also choose "traditional" to
# use traditional device names, or "label" to try filesystem labels before
# falling back to UUIDs.
#d-i partman/mount_style select uuid


